TPS61086DRCR

The TPS61086DRCR is a high-efficiency, synchronous boost converter integrated circuit (IC) designed by Texas Instruments. It is primarily used in applications requiring a stable and efficient step-up of voltage. The device operates with an input voltage range of 2.3 V to 6 V and is capable of boosting output voltages up to 18.5 V, making it suitable for battery-powered applications where higher voltage levels are needed.
The TPS61086DRCR integrates a power MOSFET with a low on-resistance for optimum efficiency. It uses a pulse-width modulation (PWM) control scheme with a selectable frequency of 600 kHz or 1.2 MHz, helping designers balance between efficiency and component size. This IC also includes features like soft-start, thermal shutdown, and overcurrent protection to enhance reliability and safety.
Typically housed in a small and thermally efficient VSON package, the TPS61086DRCR is ideal for portable devices, OLED displays, and other applications requiring efficient voltage boosting. Its compact design and advanced features make it suitable for modern electronic devices where space is at a premium.

The TPS61086DRCR is a high-performance boost converter from Texas Instruments. Key features include:
1. Wide Input Voltage Range: Supports 2.3V to 6V, making it suitable for various battery types and power sources.
2. High Efficiency: Offers up to 90% efficiency, optimizing power usage and extending battery life.
3. Adjustable Output Voltage: Capable of outputting voltages up to 28V, configurable through an external resistor network.
4. Switching Frequency: Features a fixed 1.2 MHz switching frequency, allowing for compact external components and reduced solution size.
5. Internal Compensation: Simplifies design and reduces the need for additional components.
6. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout to enhance reliability and safety.
7. Package Options: Available in a small 10-pin VSON package, supporting space-constrained applications.
The TPS61086DRCR is suitable for applications like OLED displays, audio amplifiers, and other devices requiring efficient voltage boosting.

The TPS61086DRCR is a step-up converter IC from Texas Instruments, housed in a VSON (Very Thin Small Outline No-Lead) package known as DRCR. The package features a 10-pin configuration designed for efficient thermal performance and compact PCB layout.

The TPS61086DRCR is a boost converter integrated circuit produced by Texas Instruments. It comes in a VSON (DRC) package, which has 10 pins. Here is a brief overview of the pin functions:
1. SW (Pin 1): Switch node, connected to the inductor.
2. GND (Pin 2): Ground reference for the IC.
3. FB (Pin 3): Feedback pin, used to set the output voltage via a resistor divider.
4. EN (Pin 4): Enable pin, used to turn the device on or off.
5. COMP (Pin 5): Compensation pin for stability, connected to an external RC network.
6. SS (Pin 6): Soft-start pin, sets the ramp time.
7. VIN (Pin 7): Input voltage supply to the IC.
8. PG (Pin 8): Power good indicator, open-drain output.
9. NC (Pins 9 & 10): No connection, for mechanical stability.
This IC is used to boost lower input voltages to higher output voltages in power management applications.

The TPS61086DRCR is manufactured by Texas Instruments Incorporated. Texas Instruments, commonly known as TI, is an American technology company headquartered in Dallas, Texas. It primarily focuses on designing and manufacturing semiconductors and various integrated circuits, which are sold to electronics designers and manufacturers globally. TI is one of the largest semiconductor companies worldwide and is particularly known for its analog chips and embedded processors. The company serves diverse markets, including automotive, industrial, personal electronics, communications equipment, and enterprise systems. Texas Instruments has a strong emphasis on innovation and research, contributing significantly to advancements in the electronics industry.

The TPS61086DRCR is a boost converter commonly used in applications requiring a step-up voltage. Key areas include powering OLED displays, driving white LED backlights, providing power for portable devices, and general-purpose boost conversion for battery-operated equipment. It is suitable for applications needing high efficiency and compact size.

The TPS61086DRCR is a boost converter from Texas Instruments. Equivalent products include:
1. LTC3401 from Analog Devices: A high-efficiency synchronous boost converter.
2. MIC2291 from Microchip Technology: A boost regulator with a similar output range.
3. MAX856 from Maxim Integrated: A high-frequency step-up DC-DC converter.
4. NCP1406 from ON Semiconductor: A step-up DC-DC converter.
These alternatives may differ in specific features, so reviewing their datasheets for compatibility with your application is recommended.