TCA9536DGKR

Изображения являются только для ссылки

TCA9536DGKR

REMOTE 4-BIT IC AND SMBUS I/O EX

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
NumberofI/O 4
Interface I²C, SMBus
InterruptOutput Yes
Features POR
OutputType Open Drain
Current-OutputSource/Sink 10mA, 25mA
ClockFrequency 1 MHz
Voltage-Supply 1.65V ~ 5.5V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Обзор

Description

The TCA9536DGKR is a Texas Instruments I2C GPIO (I/O) expander. It adds programmable I/O pins to a microcontroller via the I2C bus, letting you configure each pin as input or output, drive outputs, and read inputs. It uses a simple register interface (direction, output latch, input) and can optionally invert input polarity; it also provides an interrupt output to signal pin changes. Electricals: typically 1.65–5.5 V supply, I2C speeds up to 400 kHz (Fast-mode). The DGKR suffix denotes a specific package/version of the device. Common uses include expanding MCU GPIOs for sensors, LEDs, switches, and other peripherals in embedded systems.

Features

Key features of TCA9536DGKR:
- I2C-bus controlled 16-bit I/O expander (two 8‑bit ports)
- Quasi-bidirectional I/O pins with internal pull-ups
- Independent per-pin configuration: input or output
- Registers for Input Port, Output Port, Polarity Inversion, and Configuration
- Interrupt output (INT) for change on input pins
- I2C Fast Mode support (up to 400 kHz)
- Flexible I2C addressing (hardware address pins for multiple devices)
- Wide supply range: typically 1.65 V to 5.5 V
- RoHS-compliant package (DGKR variant is a specific packaging option)

Package

20-pin TSSOP (Thin Shrink Small Outline) package.

Pinout

- Pin count: 16 pins (TSSOP-16 package, DGKR).
- Function: I2C-bus 8-bit GPIO I/O expander; adds 8 bidirectional general-purpose I/O pins (with direction control), plus I2C interface, address pins, and an interrupt output.

Manufacturer

- Manufacturer: NXP Semiconductors.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and electronic components for automotive, industrial, and consumer applications.

Application

Applications of TCA9536DGKR (I2C GPIO expander):
- I2C-based I/O port expansion for MCUs
- Driving LEDs/indicators and small relays
- Reading switches, buttons, and basic sensors
- Keyboard/keypad scanning and simple UI interfaces
- Used in home/building automation, industrial control, consumer electronics, and robotics projects.

Equivalent

Equivalent parts for TCA9536DGKR (8-bit I2C GPIO expander):
- TI TCA9534 / TCA9534A
- NXP PCF8574 / PCF8574A
- NXP PCA9534 / PCA9534A
- Microchip MCP23008
- Microchip MCP23017 (16-bit, alternative if more pins are needed)
- NXP PCA9555 (16-bit)
Note: check I/O count, voltage, package, and I2C address map for compatibility.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств