SN74LVCR2245APW

Изображения являются только для ссылки

SN74LVCR2245APW

IC TXRX NON-INVERT 3.6V 20TSSOP

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Supplier Rochester Electronics, LLC,Texas Instruments
Package Bulk,Tube
Series 74LVCR
ProductStatus Active
LogicType Transceiver, Non-Inverting
NumberofElements 1
NumberofBitsperElement 8
OutputType 3-State
Current-OutputHighLow 12mA, 12mA
Voltage-Supply 1.65V ~ 3.6V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 20-TSSOP (0.173, 4.40mm Width)

Обзор

Description

SN74LVCR2245APW is TI’s low‑voltage bidirectional buffer/line driver in the SN74LVCR family. It provides multiple tri‑state buffers arranged as bidirectional bus transceivers with a direction control (DIR) and a global output enable (OE). The device is designed to buffer data between devices on a shared bus (e.g., microprocessors, memory, peripherals), isolating loads and allowing controlled data flow in either direction.
Key points:
- Low‑voltage operation (LV family; typically 1.65V–3.6V)
- Bidirectional data transfer with DIR and OE control
- Tri‑state outputs suitable for bus interfacing
- Available in PW/APW package variants (TI’s package codes)
Typical uses include buffering high‑density data/address buses, or protecting and isolating digital buses between devices in a system.
Note: exact bit width, drive strength, input/output characteristics, and voltage ranges vary by variant. For precise specifications, pinout, and timing, consult the TI SN74LVCR2245APW datasheet.

Features

Here are typical features of the SN74LVCR2245APW:
- 20-bit bidirectional bus transceiver with 3-state outputs
- Two ports labeled A and B for bidirectional data flow
- Direction control input (DIR): selects A→B or B→A data direction
- Output-enable input (OE): disables outputs to high-impedance state
- 3-state outputs on both sides for bus sharing
- Bus-hold on data inputs to prevent floating when not driven
- Low-voltage CMOS-compatible operation (typical LV range) with TTL/CMOS input thresholds
- ESD protection and robust operation per TI standards
- Available in PW package (surface-mount)
Applications include interfacing between different voltage domains, microcontroller-to-memory buses, and other shared-bus systems. For exact supply voltage range, speed, and packaging options, consult the datasheet.

Package

20-pin TSSOP package (PW).

Pinout

Pin count: 20 pins (TSSOP-20 package, PW).
Function: Dual 4-bit bidirectional bus transceiver with 3-state outputs (8-bit total). Allows data transfer between two 4-bit buses; direction controlled by a DIR input and output enable controlled by OE (one enable for the transceiver). Suitable for buffering/interfacing between different bus voltages in low-voltage logic.

Manufacturer

Manufacturer: Texas Instruments (TI).
Company type: American multinational semiconductor company that designs and manufactures a broad range of integrated circuits, analog and digital products, sensors, and related components. It is one of the world’s largest semiconductor makers, headquartered in Dallas, Texas.

Application

SN74LVCR2245APW is a 20-bit, dual 10-bit buffer/driver with tri-state outputs. Typical applications:
- Level shifting and buffering of wide data/address buses between logic families (e.g., 1.8–3.3 V to 5 V)
- I/O expansion and backplane/bus interconnections between microprocessors/FPGA and memories or peripherals
- High-speed, low-power bus routing in portable/consumer electronics
- Bus isolation/sharing and power-down bus control for bus-enabled systems

Equivalent

To give accurate equivalents, please specify target packaging and vendors. SN74LVCR2245APW is TI’s low-voltage octal buffer/driver (3-state). Do you want cross-references for PW/TSSOP-20 only, or also other packages and vendors (e.g., NXP, ON Semiconductor, Renesas, etc.)? If yes, I’ll list exact part numbers.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств