M24C04-RMN6TP

Изображения являются только для ссылки

M24C04-RMN6TP

IC EEPROM 4KBIT I2C 400KHZ 8SO

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat EEPROM
Technology EEPROM
MemorySize 4Kb (512 x 8)
MemoryInterface I²C
ClockFrequency 400 kHz
WriteCycleTime-WordPage 5ms
AccessTime 900 ns
Voltage-Supply 1.8V ~ 5.5V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

Обзор

Description

The M24C04-RMN6TP is a 4 Kbit (512 x 8) serial EEPROM (Electrically Erasable Programmable Read-Only Memory) manufactured by STMicroelectronics. It utilizes I2C (Inter-Integrated Circuit) protocol for communication, allowing easy integration into various electronic systems. The device operates with a supply voltage range of 1.8V to 5.5V, making it suitable for low-power applications.
Key features include:
- Memory Density: 4 Kbits of non-volatile storage.
- I2C Interface: Allows multiple devices on the same bus and supports multiple addresses.
- Data Retention: Typically up to 40 years, ensuring long-term storage of information.
- Write Cycle: Endurance of up to 1 million write/erase cycles per byte.
- Package Type: RMN6TP indicates a specific package style, usually in a 8-lead SOIC or similar, facilitating surface-mount technology (SMT).
This EEPROM is widely used in applications like consumer electronics, automotive systems, and industrial automation for configuration storage and data logging.

Package

The M24C04-RMN6TP is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) package. This surface-mount package configuration is designed for efficient space utilization on printed circuit boards.

Pinout

The M24C04-RMN6TP is a 4 Kbit (512 x 8 bits) EEPROM device with a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC: Supply voltage (2.5V to 5.5V).
2. GND: Ground.
3. SDA: Serial data line for data input/output.
4. SCL: Serial clock line for synchronizing data.
5. WP: Write protect; used to enable/disable write operations.
6. A0: Address pin to select between multiple devices on the same bus.
7. A1: Address pin to select between multiple devices on the same bus.
8. NC: No connection; not used.
The device operates using the I2C interface, allowing communication with microcontrollers and other devices. It is suitable for applications requiring non-volatile memory, such as data storage in embedded systems.

Manufacturer

The M24C04-RMN6TP is manufactured by Microchip Technology Inc. Microchip is a leading American semiconductor company that specializes in microcontroller, mixed-signal, analog, and flash-IP solutions. Founded in 1989, the company is known for its innovative products that serve a wide range of applications, including automotive, industrial, consumer, and communications. Microchip provides various integrated circuits and development tools that enable engineers to design and implement electronic systems efficiently. The M24C04-RMN6TP itself is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device, which is commonly used for data storage in embedded systems.

Application

The M24C04-RMN6TP is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) primarily used in applications requiring non-volatile data storage. Typical application areas include consumer electronics, automotive systems, smart cards, and medical devices for storing configuration data, calibration settings, and user preferences. It is also employed in industrial automation for control systems and in communication devices for firmware and data retention.

Equivalent

The M24C04-RMN6TP is an EEPROM (Electrically Erasable Programmable Read-Only Memory) chip. Equivalent products include:
1. AT24C04 (Atmel/Microchip)
2. 24C04 (Microchip Technology)
3. 93C56 (Microchip Technology, though slightly different)
4. CAT24C04 (ON Semiconductor)
Ensure compatibility in terms of voltage, pin configuration, and memory size before substitution.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств