LM4050AIM3-2.5

Изображения являются только для ссылки

LM4050AIM3-2.5

IC VREF SHUNT 0.1% SOT23-3

  • Производитель
  • Мфр. Часть #LM4050AIM3-2.5
  • Пакет TO-236-3, SC-59, SOT-23-3
  • Лист данных
  • В наличии4605

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Not For New Designs
ReferenceType Shunt
OutputType Fixed
Voltage-Output(Min/Fixed) 2.5V
Current-Output 15 mA
Tolerance ±0.1%
TemperatureCoefficient 50ppm/°C
Noise-10Hzto10kHz 41µVrms
Current-Cathode 65 µA
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case TO-236-3, SC-59, SOT-23-3

Обзор

Description

The LM4050AIM3-2.5 is a fixed 2.5-volt shunt voltage reference from Texas Instruments. It is a two-terminal (plus a case pin) regulator that sinks current to hold its output at a precise 2.5 V, providing a stable reference for converters, ADCs, DACs, and precision circuits. Key points:
- Fixed output: +2.5 V reference with tight accuracy and good temperature stability.
- Low dynamic impedance: maintains regulation under load changes.
- Simple, two-terminal/shunt design: no external resistor network needed for the reference itself (current is set by your bias network).
- Package: AIM3 (SOT-23-3) for compact designs.
- Applications: voltage reference for ADC/DAC, precision measurement, power-supply regulation, and reference biasing.
How to use: connect the anode to ground, the cathode to the reference node through a supply-limited resistor (to set the required cathode current for regulation), and optionally add a bypass capacitor for noise reduction. For exact electrical specs (tolerance, tempco, operating current, max ratings), consult the TI datasheet.

Features

Key features of LM4050AIM3-2.5:
- Fixed 2.5 V shunt voltage reference
- Low dynamic impedance
- Low-noise reference output
- Tight initial accuracy with low temperature drift
- Micropower operation (low quiescent current)
- Wide supply and operating temperature range (typically -40°C to 125°C)
- Robust performance with line/load changes
- Available in 8-pin package (MSOP-inspired AIM3 package)
Note: It is a fixed-reference shunt regulator suitable for precision voltage reference applications (e.g., ADC references, sensor circuits).

Package

SOT-23-3 (SC-70) 3-pin package.

Pinout

The LM4050AIM3-2.5 is supplied in a 3-pin SOT-23 package (3 pins). Its functional pins are:
- Anode: the reference negative/ground terminal
- Cathode: the reference output (2.500 V above the anode when operating as a shunt)
- Third pin: not used for the reference function (package/no‑connect or substrate/thermal tie depending on board layout)
In short: 3 pins, two functional (anode and cathode forming the 2.5 V shunt reference) and one unused/NC/thermal pin. For exact pin numbering on the package, consult the device datasheet.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: American multinational technology company that designs, manufactures, and sells semiconductors and related analog/mixed-signal integrated circuits.

Application

LM4050AIM3-2.5 is a 2.5 V shunt voltage reference. Common applications:
- Precision reference for ADCs and DACs
- Bias/reference for op-amps and instrumentation amplifiers
- Stable 2.5 V rail for portable/battery-powered electronics
- Reference/threshold for comparators and voltage regulators
- Sensor front-ends and calibration networks
- Any design needing a low-drift fixed 2.5 V reference

Equivalent

Common equivalents for the LM4050AIM3-2.5 (2.5 V shunt/voltage reference) include: TI LM4040AIM3-2.5, Analog Devices ADR4525/ADR3525 (2.5 V fixed refs), and Microchip MCP1525/MCP1541 (fixed 2.5 V refs). TLV431/TL431 (adjustable shunt) can be used with a resistor divider. Always verify tolerance, temperature coefficient, dynamic impedance, package/pinout and bias current before substituting.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств