IS25WP064D-JBLE-TR

Изображения являются только для ссылки

IS25WP064D-JBLE-TR

IC FLASH 64MBIT SPI/QUAD 8SOIC

  • Производитель
  • Мфр. Часть #IS25WP064D-JBLE-TR
  • Пакет
  • Лист данных
  • В наличии4329

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Part Status Active
Base Product Number IS25WP064
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word, Page 40µs, 800µs
Voltage - Supply 1.65V ~ 1.95V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Packaging Cut Tape (CT), Tape & Reel (TR)
Grade Automotive
Qualification AEC-Q100

Обзор

Description

IS25WP064D-JBLE-TR is ISSI’s 64-Mbit serial NOR flash memory with a SPI interface. It’s designed for storing firmware, code, and data in embedded systems and can serve as boot storage for microcontrollers/SoCs.
Key features:
- 64 Mbit (8 MBytes) non-volatile storage
- SPI-compatible interface supporting standard, dual, and quad I/O modes
- Fast read; page programming (typical 256-byte pages)
- Sector/block erase
- Low power modes and deep power-down
- Security features such as write/block protection
Packaging/variant note:
- The -TR suffix indicates tape-and-reel packaging; -JBLE denotes the device variant/grade.
Typical applications:
- Firmware storage and execution
- Data logging and bulk storage in embedded systems
For exact electrical specs (supply voltage, timing, temperature range, package options) and command set details, consult the IS25WP064D-JBLE-TR datasheet on ISSI’s website.

Features

IS25WP064D-JBLE-TR is a 64‑Mbit (8 MB) serial flash from ISSI. Key features:
- Density: 64 Mbit (8 MB) of non-volatile flash.
- Interface: SPI-compatible; supports standard SPI and Dual/Quad I/O modes for higher throughput.
- Voltage: 2.7–3.6 V operation.
- Temperature: Industrial range option available (-40 °C to +85 °C).
- Memory organization: 256-byte pages; 4 KB sectors; 32 KB/64 KB blocks; chip erase supported.
- Read/Write: Fast/continuous read capability; Page program up to 256 bytes; Write Enable (WREN) required; write protection via WP# and status register.
- Power management: Deep Power-Down mode; standby/low active current.
- Endurance and retention: ~100k P/E cycles; data retention typically ~20 years.
- Security: Block protection, per-block/top-bottom protection options via status register.
- Packaging: 8-pin device; -TR denotes Tape & Reel packaging (ready for automated assembly).
Note: exact speed grades and feature details may vary by package/variant; consult the datasheet for specific part revision.

Package

8-pin SOP (SOIC-8) package, Tape & Reel (TR) version.

Pinout

- Pin count: 8 pins (SOIC-8 / WSON-8, Tape-and-Release variant JBLE-TR).
- Function: 64-Mbit SPI/serial flash memory (IS25WP064D) used to store firmware/data. Pinout: 1 CS#, 2 SO (MISO), 3 WP#, 4 GND, 5 SI (MOSI), 6 SCLK, 7 VCC, 8 HOLD#. WP# and HOLD# are active-low controls for write protection and interface hold, respectively.

Manufacturer

- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- What kind of company: A global semiconductor company specializing in memory ICs (such as serial Flash and DRAM) that designs and markets memory products.

Application

IS25WP064D-JBLE-TR is a 64-Mbit SPI NOR flash. Typical applications:
- Firmware storage and updates for microcontrollers/SoCs
- Bootloaders and startup code storage
- External flash memory for consumer electronics (printers, cameras, set-top boxes, wearables)
- Data logging and configuration storage for IoT and industrial equipment
- General external memory for embedded systems and development boards
- Automotive/industrial-grade variants available as required (temperature/qualification per device)

Equivalent

Equivalent 64 Mbit SPI NOR Flash devices (pin and command compatible considerations apply):
- Micron N25Q064A
- Macronix MX25U064E / MX25L064F
- Winbond W25Q64FV / W25Q64JV
- GigaDevice GD25Q64C (also GD25Q64B)
Note: verify voltage (2.7–3.6V), timing, and package in the final substitution.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств