IS25LP128F-JBLA3-TR

Изображения являются только для ссылки

IS25LP128F-JBLA3-TR

IC FLASH 128MBIT SPI/QUAD 8SOIC

  • Производитель
  • Мфр. Часть #IS25LP128F-JBLA3-TR
  • Пакет
  • Лист данных
  • В наличии6790

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Part Status Active
Base Product Number IS25LP128
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 128Mbit
Memory Organization 16M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word, Page 40µs, 800µs
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 125°C (TA)
Mounting Type Surface Mount
Package 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Packaging Tape & Reel (TR)
Access Time 6.5 ns
Grade Automotive
Qualification AEC-Q100

Обзор

Description

IS25LP128F-JBLA3-TR is ISSI’s 128-Mbit serial NOR flash memory with a SPI-compatible interface. It’s designed to store firmware and data for embedded systems and boot code.
Key points:
- Capacity: 128 Mbit (16 MB) of non-volatile flash
- Interface: SPI-compatible; supports fast read timing suitable for high-speed system clocks
- Organization: 256-byte page programming; erase in 4 KB sectors, 32 KB blocks, 64 KB blocks, plus chip erase
- Voltage and power: 2.7–3.6 V operation with low-power modes (including deep power-down)
- Reliability/security: sector protection and hardware features for data integrity and security
- Package/ordering: “JBLA3” denotes the specific package variant; “TR” indicates Tape & Reel packaging for automated assembly
Typical uses:
- Boot firmware and code storage for MCUs/MPUs
- Embedded data logging and firmware updates in consumer, industrial, and automotive applications
Note: Exact timing (read speed, frequencies), voltage, and package options vary by variant. Refer to the IS25LP128F-JBLA3-TR datasheet for precise specs.

Features

Key features of IS25LP128F-JBLA3-TR (128-Mbit serial flash):
- Density: 128 Mbit (16 MB) serial NOR flash
- Interface: SPI-compatible with Dual I/O, Quad I/O, and QPI modes for high-speed data transfer
- Organization: 256-byte page size; erase structure includes 4 KB sectors and 32/64 KB blocks; chip erase
- Performance (typical): High-speed read via SPI and Quad/ QPI modes
- Security/protection: Hardware/software write protection, sector/block protection, status registers, and 64-bit unique ID
- Endurance/retention: ~100,000 program/erase cycles; data retention typically >20 years
- Power: 2.7–3.6 V operating supply; supports low-power modes including Deep Power-Down
- Package: 8-pin package; Tape & Reel (TR) packaging variant indicated by suffix
- Temperature: Industrial-grade operation typically from -40°C to 85°C
- Applications: Code storage and firmware updates for microcontrollers, embedded systems, consumer/industrial electronics
Note: exact speed ratings and voltage/temperature ranges may vary slightly by lot; consult the datasheet for precise specs.

Package

An 8-pin SOP (SOP-8) surface-mount package.

Pinout

IS25LP128F-JBLA3-TR is an 8-pin SPI flash (128 Mbit).
Pinout (8 pins):
1 CS# — Chip Select (active low)
2 DO / SO — Data Out (MISO)
3 DI / SI — Data In (MOSI)
4 GND — Ground
5 CLK — Serial Clock
6 HOLD# — Hold (active low)
7 WP# — Write Protect (active low)
8 VCC — Power supply (2.7–3.6V)

Manufacturer

- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- Company type: A semiconductor company that designs and markets memory ICs (e.g., SPI flash, SRAM, DRAM); it is a fabless memory company that outsources manufacturing to foundries.

Application

Typical applications:
- Embedded systems boot and firmware storage for MCUs/MPUs
- Firmware and application code storage with updates in IoT and consumer electronics
- Automotive ECUs, dashboards and infotainment firmware storage
- Industrial controllers, PLCs, and data-logging devices
- Small-form-factor data storage for cameras, wearables, and smart devices

Equivalent

Equivalent 128-Mbit SPI Flash parts from other vendors:
- Winbond: W25Q128FV, W25Q128JV
- Macronix: MX25L12845G (and MX25L12835F)
- GigaDevice: GD25Q128CSIG, GD25Q128C
- STMicroelectronics: S25FL128S, S25FL128SP
- Puya: P25Q128H
Notes: same basic SPI interface and 3.3V supply, but check 4-byte addressing, QPI/DQ modes, timing, package and temperature range for exact compatibility.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств