IS25LP064D-JBLE-TR

Изображения являются только для ссылки

IS25LP064D-JBLE-TR

IC FLASH 64MBIT SPI/QUAD 8SOIC

  • Производитель
  • Мфр. Часть #IS25LP064D-JBLE-TR
  • Пакет
  • Лист данных IS25LP064D-JBLE-TR DataSheet
  • В наличии11562

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Part Status Active
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR (SLC)
Memory Size 64Mbit
Memory Organization 8M x 8
Memory Interface SPI - Quad I/O, QPI, DTR
Clock Frequency 166 MHz
Write Cycle Time - Word, Page 40µs, 800µs
Voltage - Supply 2.3V ~ 3.6V
Operating Temperature -40°C ~ 105°C (TA)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.209", 5.30mm Width)
Supplier Device Package 8-SOIC
Base Product Number IS25LP064
DigiKey Programmable Not Verified
Grade Automotive
Qualification AEC-Q100

Обзор

Description

The IS25LP064D-JBLE-TR is a 64Mb (8MB) Serial NOR Flash memory chip manufactured by ISSI (Integrated Silicon Solution, Inc.). It is designed for embedded systems requiring high-speed data storage and retrieval. The chip supports the Serial Peripheral Interface (SPI) protocol, allowing for easy integration into various applications.
Key features include:
- Memory Type: NOR Flash
- Density: 64Mb (8MB)
- Voltage Range: Operates between 2.7V to 3.6V, making it suitable for low-power applications.
- Speed: Offers high-speed read capabilities, with a maximum clock frequency of up to 104 MHz.
- Data Interface: Supports single, dual, and quad SPI modes for versatile data transfer options.
- Endurance: Typically has a program/erase cycle endurance of about 100,000 cycles.
- Reliability: Features built-in security mechanisms, including a 64-bit serial number and uniform sector architecture for efficient use of memory.
This chip is ideal for applications in consumer electronics, automotive, industrial, and IoT devices, where reliable data storage is crucial.

Features

The IS25LP064D-JBLE-TR is a 64Mb (8MB) Serial NOR Flash memory device manufactured by ISSI (Integrated Silicon Solution, Inc.). Key features include:
1. Memory Density: 64Mb (8MB) storage capacity.
2. Interface: Serial Peripheral Interface (SPI) with support for dual and quad I/O modes, enhancing data transfer rates.
3. Speed: Offers fast read access times, typically around 104 MHz, facilitating quicker data retrieval.
4. Voltage Supply: Operates with a supply voltage of 2.7V to 3.6V.
5. Data Retention: Provides a minimum data retention period of 20 years at 85°C.
6. Endurance: Supports up to 100,000 program/erase cycles.
7. Package Options: Available in various package types, including SOIC and WSON, for flexibility in applications.
8. Applications: Suitable for a wide range of applications, including consumer electronics, automotive, and industrial uses, where code storage and firmware updates are essential.
These features make the IS25LP064D-JBLE-TR a reliable choice for embedded systems requiring efficient storage solutions.

Package

The IS25LP064D-JBLE-TR is packaged in a 8-pin SOIC (Small Outline Integrated Circuit) format. This package type is designed for surface mounting and offers a compact size suitable for various electronic applications.

Pinout

The IS25LP064D-JBLE-TR is a 64Mb (8MB) serial NOR Flash memory. It has a total of 8 pins. The pin functions are as follows:
1. CS# (Chip Select): Active low signal to enable the device.
2. SO (Serial Output): Data output pin for read operations.
3. W# (Write Protect): Active low signal to prevent write operations.
4. SI (Serial Input): Data input pin for write operations.
5. SCK (Serial Clock): Clock input for synchronizing data transfer.
6. HOLD#: Active low signal to pause operations without deselecting the chip.
7. VCC: Power supply pin.
8. GND: Ground pin.
This memory device supports various operations like read, write, and erase, utilizing a SPI (Serial Peripheral Interface) protocol for communication.

Manufacturer

The IS25LP064D-JBLE-TR is manufactured by ISSI (Integrated Silicon Solution, Inc.), a company that specializes in memory solutions. ISSI is known for designing, manufacturing, and supplying a range of memory products, including SRAM, DRAM, and flash memory. The IS25LP064D is a serial NOR flash memory device used in various applications, such as consumer electronics, automotive systems, and industrial products. ISSI focuses on providing high-performance and cost-effective memory solutions to meet the demands of various markets. The company operates globally and is recognized for its innovation in memory technology.

Application

The IS25LP064D-JBLE-TR is a 64Mb serial NOR flash memory primarily used in embedded systems, automotive applications, consumer electronics, and industrial devices. Its applications include code storage, firmware updates, data logging, and configurations in devices such as IoT sensors, smart appliances, and telecommunications equipment. The chip supports fast read speeds and low power consumption, making it suitable for applications requiring quick data access and efficient energy use.

Equivalent

The IS25LP064D-JBLE-TR chip is a 64Mb Serial NOR Flash memory. Equivalent products include:
1. Winbond W25Q64FV
2. Micron MT25QL064
3. Macronix MX25L6445E
Ensure compatibility regarding voltage, speed, and pin configuration when selecting substitutes. Always refer to datasheets for detailed specifications.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств