Изображения являются только для ссылки

IR2136

Name: IR2136
Rating: 4.7 (12 reviews)

IC GATE DRVR HALF-BRIDGE 28DIP

Производитель
Мфр. Часть #IR2136
Пакет
Лист данных
В наличии9489

+БОМ RFQ

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Part Status	Obsolete
Base Product Number	IR2136
DigiKey Programmable	Not Verified
Driven Configuration	Half-Bridge
Channel Type	3-Phase
Number of Drivers	6
Gate Type	IGBT, MOSFET (N-Channel)
Voltage - Supply	10V ~ 20V
Logic Voltage - VIL, VIH	0.8V, 3V
Current - Peak Output (Source, Sink)	200mA, 350mA
Input Type	Inverting
Rise / Fall Time (Typ)	125ns, 50ns
Operating Temperature	-40°C ~ 150°C (TJ)
Mounting Type	Through Hole
Package	28-DIP (0.600", 15.24mm)
Supplier Device Package	28-PDIP
Packaging	Tube
High Side Voltage - Max (Bootstrap)	600 V

Обзор

Description

IR2136 is a high-voltage, dual MOSFET gate driver for N-channel devices in a half-bridge (high-side and low-side) from International Rectifier (now Infineon). It drives HO (high-side gate) and LO (low-side gate) using a bootstrap-floating supply for the high-side (VB–VS) and a standard supply for the low-side (VCC). Typical applications: PWM motor drives, inverters, and switching power supplies.
Key features (typical): input/enable controls (e.g., IN and/or HIN/LIN with a shutdown option), undervoltage lockout on VCC and VB, shoot-through protection, and fast turn-off. The high-side supply is bootstrap-dependent and requires an external diode and capacitor. The high-side can withstand the bus voltage range, while the driver logic runs from VCC (usually 10–20 V).
Design notes: ensure proper bootstrap refresh by toggling the low-side, size the bootstrap cap for required peak current, and follow good PCB layout to minimize loop areas. If you want, I can add pinout specifics or a typical application circuit.

Features

IR2136 is a high-voltage, dual gate driver for N-channel MOSFETs in a half-bridge. Key features:
- Floating high-side driver up to VB–VS ≈ 600 V (bootstrap operation)
- Independent HO (high-side) and LO (low-side) outputs with totem-pole drive
- Bootstrap supply requires external diode and capacitor
- Gate-drive voltage typically 10–12 V; logic supply VCC 10–20 V
- UVLO protection on VCC and VB to prevent unsafe gate drive
- Input interface (e.g., IN and SD/Shutdown) with TTL/CMOS compatibility
- Fast switching with low propagation delay and crisp rise/fall times
- Wide operating temperature range (typical -40°C to +125°C) and robust packaging (8-pin SOIC/DIP)
Uses: offline switcher power supplies, motor-control half-bridges, and other high-voltage MOSFET driver applications.

Package

IR2136 comes in 8-pin packages: DIP-8 and SO-8 (surface-mount).

Pinout

- Pin count: 16-pin package (DIP16/SO16).
- Function: Dual high-side/low-side gate driver for a half-bridge. Provides HO and LO outputs to drive N-channel MOSFETs, with a bootstrap high-side supply (VB and VS) and a logic supply (VCC/VSS). Inputs are HIN and LIN (separate control), often with an enable/shutdown; includes UVLO and fault protections. Requires a bootstrap capacitor between VB and VS.

Manufacturer

Manufacturer: Infineon Technologies (the IR2136 originates from International Rectifier, now part of Infineon).
What kind of company: Infineon is a German multinational semiconductor company that designs and manufactures power management ICs, discrete semiconductors, and related electronics.

Application

IR2136 is a high-voltage dual-channel gate driver (bootstrap high-side, independent low-side) for two N-channel MOSFETs. Applications: driving half-bridge/topology stages in switch‑mode power supplies, LLC resonant converters, DC‑DC converters, motor drives (BLDC/induction), and full‑bridge inverters in solar inverters, UPS, PFC front ends, and other high‑voltage SMPS systems.

Equivalent

IR2136 is a dual high-side/low-side bootstrap gate driver for N-channel MOSFETs (HV). Direct substitutes from other vendors are generally other dual HV gate drivers. Common cross‑references include:
- TI: UCC27xx/UCC2xx series
- ST: L638x/L638xA series
- Onsemi: NCP8x2x/NCP8123x series
Note: exact pinout, voltage rating, drive strength, and features vary. For a precise drop‑in, match the voltage (e.g., up to 600 V), logic levels, and package; share your requirements for an exact substitute.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.

Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.