FT2232H-56Q-TRAY

Изображения являются только для ссылки

FT2232H-56Q-TRAY

IC DUAL USB TO UART/FIFO 56VQFN

  • Производитель
  • Мфр. Часть #FT2232H-56Q-TRAY
  • Пакет 56-VFQFN Exposed Pad
  • Лист данных
  • В наличии3862

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Supplier FTDI, Future Technology Devices International Ltd
Package Tray
ProductStatus Active
Protocol USB
Function Bridge, USB to UART,FIFO
Interface UART, FIFO
Standards USB 2.0
Voltage-Supply 3.3V
OperatingTemperature -40°C ~ 85°C
Package/Case 56-VFQFN Exposed Pad

Обзор

Description

FT2232H-56Q-TRAY is FTDI’s USB 2.0 High‑Speed dual‑channel controller in a 56‑pin QFN package (56Q), shipped in tray packaging. It provides two independent channels (A and B) that can operate as:
- UARTs, or
- MPSSE-enabled interfaces for SPI, I2C, JTAG, etc., or in FIFO/bit-bang modes.
Key points:
- USB 2.0 full/Hi-Speed up to 480 Mbps; multiple parallel protocol options via MPSSE.
- Useful for USB-to-serial bridges, SPI/I2C/JTAG adapters, FPGA/IC programmers, and custom USB peripherals.
- Driver support via FTDI D2XX API or VCP (Windows/Linux/macOS).
Packaging note:
- “TRAY” indicates tray packaging for manufacturing; “56Q” refers to the 56‑pin QFN package.
Typical workflow:
- Install FTDI drivers, use D2XX or libMPSSE, configure channels, and select the desired protocol per channel.

Features

Here are the key features of FT2232H-56Q-TRAY:
- Dual independent channels (A and B) with USB 2.0 Hi-Speed interface
- Each channel configurable as: UART, FIFO (data streaming), or MPSSE (SPI, I2C, JTAG, etc.)
- Both channels can run concurrently with separate data paths
- MPSSE enables synchronous serial protocols and flexible clocking
- Bit-bang/I/O modes for custom parallel control
- Selectable VCCIO for target logic levels (compatible with 1.8/2.5/3.3 V IO in many configurations)
- On-chip USB transceiver; no external USB PHY required
- Driver support: FTDI D2XX API and VCP (Windows, Linux, macOS)
- 56-pin QFN package in TRAY packaging (FT2232H-56Q-TRAY)
- Suitable for high-throughput streaming via dual FIFOs
- General-purpose, low-pin-count USB-to-peripheral solution with flexible interfaces
- Typical industrial temperature range (design-specifics in datasheet)

Package

Package type: 56-pin QFN (QFN56) package. “TRAY” indicates tray packaging for shipment (not tape-and-reel).

Pinout

- Pin count: 56 pins (56‑pin QFN package, FT2232H-56Q-TRAY).
- Function: USB 2.0 High-Speed dual‑channel USB‑to‑serial/FIFO controller. Provides two independent channels (A and B) that can be configured as UARTs or FIFO interfaces, with MPSSE for SPI/I2C/JTAG and GPIO.

Manufacturer

- Manufacturer: FTDI Limited (Future Technology Devices International Limited).
- What kind of company: A UK-based semiconductor company that designs USB interface ICs (e.g., USB-to-serial bridges and MPSSE devices). It is a fabless design house, outsourcing fabrication to foundries.

Application

Application areas of FT2232H-56Q-TRAY:
- USB-to-serial bridges: dual UART channels for consoles and embedded MCUs.
- FIFO/data streaming: high-speed data acquisition, logging, and inter-board communication.
- MPSSE-based multi-protocol: JTAG, SPI, I2C for programming, debugging, and peripheral emulation (MCU/FPGA).
- Custom protocols and test equipment: protocol analyzers, USB host/device bridging.
- OEM/evaluation tooling: development boards, USB dongles, portable interfaces.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств