EP2C20F484C6N

The EP2C20F484C6N is a member of the Cyclone II family of FPGAs (Field-Programmable Gate Arrays) developed by Altera, now part of Intel. This specific model is designed to provide a cost-effective solution with relatively low power consumption and a balance of performance for a variety of applications.
Key features of the EP2C20F484C6N include:
1. Logic Elements: It contains 20,060 logic elements, which can be used to implement custom digital circuitry.
2. Package Type: It comes in a FineLine BGA package with 484 pins, facilitating high-density board designs.
3. Memory: Includes embedded memory blocks for storing data and implementing functions like FIFOs and buffers.
4. Clock Management: Features PLLs (Phase-Locked Loops) for clock management and optimization.
5. I/O Standards: Supports a wide range of I/O standards for compatibility with different interfaces.
6. Applications: Suitable for use in communication devices, consumer electronics, and industrial applications where low power and moderate performance are required.
Overall, the EP2C20F484C6N is ideal for developers looking for a flexible, cost-effective FPGA solution with a moderate level of complexity and performance.

The EP2C20F484C6N is part of the Altera Cyclone II family of FPGAs. It features 18,752 Logic Elements (LEs) and 52 embedded 18x18 multipliers, making it suitable for a variety of applications that require moderate logic density and digital signal processing capabilities. The device has 239,616 RAM bits, providing on-chip memory for data storage and processing needs. It supports a maximum of 294 user I/O pins, allowing for flexible interfacing with other components. The FPGA is built on a 90nm process technology, which balances power efficiency and performance. It includes features like phase-locked loops (PLLs) for clock management and configuration support via JTAG, Active Serial, and Passive Serial methods. The package type is a 484-pin FineLine BGA, making it compact for applications requiring small form factors. This FPGA is well-suited for cost-sensitive applications that demand reliable performance without the need for advanced features found in higher-end FPGAs.

The EP2C20F484C6N is an FPGA from Altera's Cyclone II series, and it comes in a Fine-Pitch Ball Grid Array (FBGA) package with 484 pins.

The EP2C20F484C6N is a member of the Cyclone II family of FPGAs from Altera (now part of Intel). It features 484 pins. These pins are used for a variety of functions, including general-purpose I/O, power supply, configuration, and dedicated clock inputs.
The primary functions of the pins in the EP2C20F484C6N include:
1. General-Purpose I/O (GPIO): Many of the pins can be configured as general-purpose inputs or outputs to interface with other devices.
2. Power and Ground: Pins are allocated for power supply (VCC, VCCINT) and grounding (GND) to provide the necessary power and stability to the FPGA.
3. Configuration: Some pins are used for configuring the FPGA upon power-up or reset, through methods such as JTAG or passive serial configuration.
4. Dedicated Clock Inputs: To facilitate proper timing and clock management, certain pins are dedicated to receiving clock signals.
5. Special Function Pins: These may include pins for dedicated communication protocols or other specialized functions.
For detailed pin assignments and functions, refer to the device's datasheet or pin-out documentation from Altera/Intel.

The EP2C20F484C6N is manufactured by Altera Corporation, which is now a part of Intel Corporation. Altera was an American company that specialized in designing and manufacturing programmable logic devices (PLDs), including field-programmable gate arrays (FPGAs), complex programmable logic devices (CPLDs), and other related products. In 2015, Altera was acquired by Intel, integrating its products and technologies into Intel's Programmable Solutions Group. Intel, a multinational corporation known for its semiconductor products, is one of the world's largest and highest-valued semiconductor chip manufacturers. The acquisition of Altera allowed Intel to expand its product offerings and strengthen its position in the data center and Internet of Things (IoT) markets, leveraging Altera’s expertise in programmable logic devices to enhance Intel's capabilities in providing adaptable, high-performance computing solutions.

The EP2C20F484C6N is an FPGA from Altera's Cyclone II family, typically used in applications requiring moderate logic integration. Key application areas include digital signal processing, embedded systems, communications systems, and industrial automation. It is suitable for prototyping and development of custom logic circuits, implementing algorithms in hardware, and creating interfaces for peripheral devices. Its balance of cost, performance, and power efficiency makes it ideal for consumer electronics, automotive systems, and educational purposes in teaching digital design concepts.

The EP2C20F484C6N is an Altera Cyclone II FPGA. Equivalent products may include similar FPGAs from other manufacturers, such as the Xilinx Spartan-3 series (e.g., XC3S200 or XC3S400), Lattice's MachXO2 series, or Microsemi's (now part of Microchip) IGLOO series. The exact equivalent depends on specific requirements like logic elements, I/O pins, and performance characteristics. Always verify compatibility with your application's specifications.