Изображения являются только для ссылки

DS1302S+

Name: DS1302S+
Rating: 4.7 (12 reviews)

IC RTC CLK/CALENDAR SER 8-SOIC

Производитель
Мфр. Часть #DS1302S+
Пакет SOP8
Лист данных
В наличии5398

+БОМ RFQ

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
Type	Clock/Calendar
Features	Alarm, Leap Year
TimeFormat	HH:MM:SS (12/24 hr)
DateFormat	YY-MM-DD-dd
Interface	I²C, 2-Wire Serial
Voltage-Supply	1.3V ~ 5.5V
Current-Timekeeping(Max)	14µA ~ 30µA @ 3V ~ 5V
OperatingTemperature	-40°C ~ 85°C
MountingType	Surface Mount
Package/Case	8-SMD, Flat Lead
MemorySize	1B
Voltage-SupplyBattery	1.6V ~ 3.6V
Series	Automotive, AEC-Q200

Обзор

Description

DS1302S+ is a real-time clock/calendar IC (RTC) from Dallas/Maxim. It combines timekeeping (seconds, minutes, hours, day, date, month, year with leap-year support) with 31 bytes of non-volatile RAM and a trickle-charge circuit, all powered by a main supply (2–5.5 V) plus battery backup (VBAT). It keeps running when power is lost.
Key features:
- 32.768 kHz crystal input for accurate time
- 1 Hz SQW/OUT optional output
- 3-wire serial interface (CE, SCLK, IO) with bidirectional IO line
- 31 bytes NV RAM for user data
- CH bit in seconds register must be cleared to run the clock
- Burst/read/write and convenient bit/BCD data handling
Typical use:
- Connect Vcc and GND, VBAT to a backup source, X1/X2 to the crystal
- Use CE, SCLK, IO to read/write time and RAM
- Read/write times in BCD; avoid stopping the clock
Note: DS1302S+ is essentially the same DS1302 with possible packaging/variant tweaks. Core functionality remains RTC + RAM with trickle-charge.

Features

Here are the main features of DS1302S+ ( RTC/clock IC ):
- Real-time clock with calendar: tracks seconds, minutes, hours, date, month, day of week, year; supports 12/24-hour mode with leap-year handling.
- 32.768 kHz crystal input for accurate timekeeping.
- Battery backup with automatic switchover; built-in trickle-charge circuit to charge a backup cell or supercapacitor from Vcc.
- 31 bytes of battery-backed NV RAM for user data storage.
- 3-wire serial interface (CE, I/O, CLK) with direct register addressing (not I2C or SPI).
- Programmable SQW/OUT square-wave output for timing/synchronization.
- Wide supply voltage: typically 2.0V to 5.5V; low power operation.
- Industrial temperature range support (suitable for room to harsh environments).
- Small 8-pin package variants and straightforward software interface.
Note: DS1302S+ focuses on simple timekeeping with backup, RAM, and a flexible serial interface.

Package

DS1302S+ uses an 8-pin SOP (SOP-8) surface-mount package.

Pinout

- Pin count: 8 pins (DIP-8/SO-8 package).
- Function: Real-time clock/calendar with 32 kHz oscillator and 31 bytes of battery-backed RAM. Uses a 3-wire serial interface (CE, IO, SCLK) to access RTC registers and RAM. Power pins: VCC (main supply), GND, and VBAT (battery backup). Also supports an optional trickle-charge circuit via two pins for external diode/resistor network to charge the backup battery.

Manufacturer

- Manufacturer: Dallas Semiconductor (the DS prefix is their naming). It is now part of Maxim Integrated (and today under Analog Devices).
- Company type: a U.S. semiconductor company that designs and manufactures integrated circuits (e.g., RTCs, memory, analog/mixed-signal ICs).

Application

DS1302S+ is a battery-backed real-time clock with RAM and a trickle charger. Typical applications:
- Time-stamping and scheduling in embedded systems (data loggers, measurement/industrial controllers, POS terminals)
- Home/industrial automation, alarms and timers
- Portable/wearable devices needing offline timekeeping
- Event logging in security systems
- Medical devices requiring accurate time base

Equivalent

Common RTC equivalents/alternatives to DS1302S+ (not pin‑for‑pin drop‑in due to interface differences):
- DS1302/DS1307 (Dallas/Maxim) – 3‑wire interface, battery-backed RAM
- DS3231/DS3232 (Maxim) – I2C RTC, high accuracy
- PCF8563 (NXP) – I2C RTC with RAM
- MCP7940N / MCP7941X / MCP7950X (Microchip) – I2C RTC with RAM
- Seiko S‑35390/S‑35392 (SII) – I2C RTC options
Note: choose by interface and memory needs.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.

Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.