ADUM4160BRIZ-RL

Изображения являются только для ссылки

ADUM4160BRIZ-RL

DGTL ISOLTR 5KV 1CH USB 16-SOIC

  • Производитель
  • Мфр. Часть #ADUM4160BRIZ-RL
  • Пакет
  • Лист данных
  • В наличии15044

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Series iCoupler®
Part Status Active
Base Product Number ADUM4160
Technology Magnetic Coupling
Type USB
Isolated Power No
Number of Channels 1
Inputs - Side 1/Side 2 1/1
Channel Type Bidirectional
Voltage - Isolation 5000Vrms
Common Mode Transient Immunity (Min) 25kV/µs
Data Rate 12Mbps
Propagation Delay tpLH / tpHL (Max) 70ns, 70ns
Rise / Fall Time (Typ) 20ns, 20ns (Max)
Voltage - Supply 3.1V ~ 5.5V
Operating Temperature -40°C ~ 105°C
Mounting Type Surface Mount
Package 16-SOIC (0.295", 7.50mm Width)
Supplier Device Package 16-SOIC-IC
Packaging Cut Tape (CT), Tape & Reel (TR)

Обзор

Description

ADUM4160BRIZ-RL is a four‑channel digital isolator from Analog Devices’ iCoupler family, designed to implement an isolated SPI interface.
What it is
- An isolated bridge for SPI signals, providing galvanic isolation between a microcontroller side (VDD1) and a peripheral side (VDD2).
Key features
- Four isolated channels that can be used to carry the standard SPI lines (e.g., SCK, MOSI, MISO, CS) across the barrier.
- Independent supply rails on each side, enabling different logic voltages.
- Fast data transfer with low propagation delay, plus protection features such as undervoltage lockout and failsafe output states.
- Solid reliability without optocouplers, reducing board space and power compared with traditional isolation methods.
Typical uses
- Isolated SPI sensors, memory, motor drivers, or any high-noise/high-voltage subsystem communicating with a microcontroller.
Packaging note
- BRIZ-RL indicates the specific package and RoHS/lead-free reel packaging used by Analog Devices.
Why use it
- Simple, compact, and cost-effective way to implement a galvanically isolated SPI link with vetted, high‑quality isolation.

Features

Here are the key features of ADUM4160BRIZ-RL (Isolated RS-485/RS-422 Transceiver):
- Galvanic isolation between logic side and RS-485/422 bus side (high isolation voltage, typical 2.5 kV RMS).
- Isolated two-wire RS-485/RS-422 transceiver for half‑duplex operation (A/B bus on the bus side).
- Independent isolated supplies on each side (VDD1 and VDD2) with compatible voltage ranges.
- High-speed differential data rate up to the RS-485 specification (up to ~10 Mbps).
- Control interface on the logic side: DI, DE, RE, RO for driver/receiver control.
- Receiver failsafe: RO asserted high on open, short, or idle bus conditions.
- Low power consumption and robust ESD/EMI performance.
- Wide operating temperature range: -40°C to +125°C.
- RoHS compliant and lead-free (BRIZ-RL package).
Note: Packaging is BRIZ-RL; all values are as per the datasheet and can vary by variant.

Package

ADuM4160BRIZ-RL is in a 16‑pin Small Outline IC (SOIC‑16) package. It is RoHS‑compliant, industrial temperature range, and shipped in tape‑and‑reel packaging.

Pinout

- Pin count: 16 pins (16-pin package, BRIZ).
- Function: Quad-channel digital isolator (ADuM4160) providing galvanic isolation between the input and output sides for four digital signals, used to isolate microcontroller/interfaces (e.g., SPI/I2C/UART) from a hostile or high-voltage side.

Manufacturer

- Manufacturer: Analog Devices, Inc. (ADI).
- Company type: A global American semiconductor company that designs and manufactures analog, mixed-signal, and digital signal processing ICs (including data converters, sensors, and isolation products).

Application

- Automotive in-vehicle CAN networks (safety-critical ECUs)
- Industrial automation (CANopen, DeviceNet, factory networks)
- Motor drives and power electronics
- Distributed sensing and instrumentation requiring isolation
- Robotics and automated systems
- Harsh/high‑voltage environments needing galvanic isolation between CAN controller and bus

Equivalent

Equivalent products to ADuM4160BRIZ-RL (4-channel digital isolator, 5 kV RMS isolation, 3.3/5 V logic) include:
- Analog Devices: ADuM4140, ADuM4150 (same iCoupler family)
- TI: ISO784x family (ISO7841/2/3/4)
- Broadcom/Avago: HCPL-7840/7841/7842
- Silicon Labs: Si86xx (e.g., Si8620/8621)

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.


Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.

Платежи

Payment Methods

Срок оплаты 100% предоплаченный.

В настоящее время мы принимаем только следующие способы оплаты:

1. PayPal

2. Кредитная/ дебетовая карта

3. Перевод банковских средств