Изображения являются только для ссылки

93LC66C-I/ST

Name: 93LC66C-I/ST
Rating: 4.7 (12 reviews)

IC EEPROM 4KBIT MICROWIRE 8TSSOP

Производитель
Мфр. Часть #93LC66C-I/ST
Пакет
Лист данных 93LC66C-I/ST DataSheet
В наличии8784

+БОМ RFQ

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Part Status	Active
DigiKey Programmable	Verified
Memory Type	Non-Volatile
Memory Format	EEPROM
Technology	EEPROM
Memory Size	4Kbit
Memory Organization	512 x 8, 256 x 16
Memory Interface	Microwire
Write Cycle Time - Word, Page	6ms
Voltage - Supply	2.5V ~ 5.5V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	8-TSSOP (0.173", 4.40mm Width)
Supplier Device Package	8-TSSOP
Base Product Number	93LC66
Clock Frequency	3 MHz

Обзор

Description

The 93LC66C-I/ST is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) designed for applications requiring non-volatile data storage. It features a 1 Kbit (128 x 8-bit) memory capacity and operates using a simple serial interface, allowing efficient data transfer over a 3-wire protocol (Serial Data Input, Serial Data Output, and Serial Clock).
This EEPROM is designed for low-power applications and can operate at a voltage range of 1.8V to 5.5V, making it suitable for battery-operated devices. The device supports fast data access, with read and write cycles typically in the microsecond range.
The 93LC66C-I/ST is ideal for storing configuration data, calibration settings, or other small amounts of data that need to be retained when the power is turned off. Its compact size and ease of integration make it a popular choice in consumer electronics, automotive systems, and industrial applications.

Features

The 93LC66C-I/ST is a 2-wire serial EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. Key features include:
1. Memory Capacity: 1 Kbit (128 bytes), organized as 16 pages of 8 bits each.
2. Interface: I²C-compatible serial interface for easy integration with microcontrollers.
3. Data Retention: Capable of retaining data for up to 100 years.
4. Write Endurance: Supports at least 1 million write/erase cycles.
5. Operating Voltage: Typically operates between 2.5V and 5.5V, making it suitable for low-voltage applications.
6. Low Power Consumption: Designed for minimal power usage during operation and standby modes.
7. Byte and Page Write: Allows for writing data in both byte and page modes, enhancing flexibility.
8. Temperature Range: Operates reliably over a wide temperature range (-40°C to +85°C).
9. Package Options: Available in various packages, including SOIC and TSSOP.
This device is ideal for applications that require non-volatile storage in compact electronic designs.

Package

The 93LC66C-I/ST is available in an 8-pin PDIP (Plastic Dual In-Line Package) format. This type of package is designed for easy insertion into circuit boards, offering a compact and robust solution for integrated circuits.

Pinout

The 93LC66C-I/ST is an EEPROM (Electrically Erasable Programmable Read-Only Memory) device with a total of 8 pins. Here are its pin functions:
1. VCC (Pin 1): Power supply pin.
2. GND (Pin 2): Ground pin.
3. CS (Pin 3): Chip Select; activated low to enable the device.
4. SI (Pin 4): Serial Input; data input pin.
5. SO (Pin 5): Serial Output; data output pin.
6. SCK (Pin 6): Serial Clock; clock input for data synchronization.
7. HOLD (Pin 7): Hold; used to pause operations without resetting.
8. WP (Pin 8): Write Protect; prevents writing to the memory when high.
The 93LC66C-I/ST is typically used for applications requiring non-volatile memory storage, such as configuration settings and data storage in consumer electronics.

Manufacturer

The manufacturer of the 93LC66C-I/ST is Microchip Technology Inc. Microchip Technology is a leading provider of microcontroller and analog semiconductors. Founded in 1989, the company specializes in the design and manufacturing of a wide range of embedded control products, including microcontrollers, digital signal controllers, and various memory devices like EEPROMs and flash memory. Microchip serves a diverse set of industries, including automotive, industrial, consumer electronics, and communications, focusing on providing innovative solutions for embedded applications. The company is known for its commitment to quality, reliability, and customer support, enabling engineers to develop efficient and cost-effective designs.

Application

The 93LC66C-I/ST is a serial EEPROM memory device commonly used in applications such as consumer electronics, automotive systems, and industrial control. It is ideal for storing configuration data, calibration constants, and firmware in devices like smart meters, IoT devices, and embedded systems. Its low power consumption and reliability make it suitable for portable and battery-operated applications.

Equivalent

The 93LC66C-I/ST is a serial EEPROM memory chip. Equivalent products include the Microchip 93LC56C, 93C56, and the Atmel AT93C66. These chips share similar characteristics such as serial communication and EEPROM functionality, but it's essential to verify specific electrical and timing parameters for compatibility in your application.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.

Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.