Изображения являются только для ссылки

24LC128T-I/ST

Name: 24LC128T-I/ST
Rating: 4.7 (12 reviews)

IC EEPROM 128KBIT I2C 8TSSOP

Производитель
Мфр. Часть #24LC128T-I/ST
Пакет TSSOP-8
Лист данных 24LC128T-I/ST DataSheet
В наличии5222

+БОМ RFQ

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Package	Tape & Reel (TR),Cut Tape (CT)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	EEPROM
Technology	EEPROM
MemorySize	128Kb (16K x 8)
MemoryInterface	I²C
ClockFrequency	400 kHz
WriteCycleTime-WordPage	5ms
AccessTime	900 ns
Voltage-Supply	2.5V ~ 5.5V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-TSSOP (0.173, 4.40mm Width)

Обзор

Description

The 24LC128T-I/ST is a 128 Kbit (16 Kbyte) I²C EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. This non-volatile memory device is used for storing data without requiring a continuous power supply. It operates on a supply voltage range of 1.8V to 5.5V and features a 2-wire I²C interface for communication, allowing multiple devices to be connected on the same bus.
The 24LC128T-I/ST supports fast-mode (up to 400 kHz) I²C communication and is available in various packages, including the 8-pin SOIC. It offers a write cycle time of approximately 5 ms and supports page write operations, enabling multiple bytes to be written in a single operation. This makes it suitable for applications requiring data logging, configuration settings, and other scenarios where data retention is critical after power loss. The device also features built-in write protection and is ideal for consumer electronics, automotive, and industrial applications.

Features

The 24LC128T-I/ST is a 128 Kbit (16 Kbytes) EEPROM (Electrically Erasable Programmable Read-Only Memory) from Microchip Technology. Key features include:
- Interface: I2C compatible, allowing easy integration with microcontrollers and other devices.
- Operating Voltage: 2.5V to 5.5V, suitable for a wide range of applications.
- Data Retention: Typically 100 years, ensuring long-term data storage.
- Write Endurance: Supports up to 1,000,000 write/erase cycles per memory cell.
- Access Speed: Fast data access with a maximum clock frequency of 1 MHz in standard mode.
- Memory Organization: Organized as 16 pages of 128 bytes each, facilitating efficient data management.
- Built-in Write Protection: Ensures data integrity during power loss.
- Small Package Options: Available in SOIC, TSSOP, and DFN packages, making it suitable for space-constrained applications.
This EEPROM is ideal for applications requiring non-volatile memory, such as configuration storage, calibration data, and other low-power systems.

Package

The 24LC128T-I/ST is packaged in an SOIC-8 (Small Outline Integrated Circuit) format. This surface-mount packaging typically features eight pins and is designed for easy integration onto printed circuit boards.

Pinout

The 24LC128T-I/ST is an I²C EEPROM (Electrically Erasable Programmable Read-Only Memory) with a pin count of 8.
Pin Functions:
1. VCC (Pin 1): Power supply (+2.5V to +5.5V).
2. GND (Pin 2): Ground.
3. SDA (Pin 3): Serial Data Line for data transfer.
4. SCL (Pin 4): Serial Clock Line for synchronization of data transfer.
5. WP (Pin 5): Write Protect pin; when connected to VCC, it prevents write operations.
6. A0 (Pin 6): Address pin for hardware addressing (can be connected to GND or VCC for addressing).
7. A1 (Pin 7): Address pin for hardware addressing (can be connected to GND or VCC for addressing).
8. A2 (Pin 8): Address pin for hardware addressing (can be connected to GND or VCC for addressing).
The 24LC128T-I/ST provides 128 Kbit of memory and operates in a standard I²C communication mode.

Manufacturer

The manufacturer of the 24LC128T-I/ST is Microchip Technology Inc. Microchip is an American company that specializes in designing and manufacturing microcontroller and microprocessor products. They are also known for their embedded control solutions and various types of memory products, including EEPROM and Flash memory. Founded in 1989, Microchip serves a wide range of industries, including automotive, industrial, consumer electronics, and telecommunications. The company is recognized for its commitment to providing high-quality, long-lasting products and comprehensive support for engineers and developers.

Application

The 24LC128T-I/ST is an I2C EEPROM widely used for non-volatile data storage in applications such as microcontroller interfacing, data logging, configuration settings, and sensor calibration. It is suitable for embedded systems, automotive electronics, consumer electronics, and industrial automation, where reliable memory with low power consumption is required.

Equivalent

The 24LC128T-I/ST chip is a 128 Kbit I2C EEPROM. Equivalent products include:
1. Microchip 24LC128
2. Atmel AT24C128
3. STMicroelectronics M24C128
4. ON Semiconductor CAT24C128
These alternatives offer similar specifications and functionality for applications requiring I2C EEPROM memory. Always check the datasheets for specific pin configurations and electrical characteristics.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.

Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.