Изображения являются только для ссылки

24LC1025-I/SN

Name: 24LC1025-I/SN
Rating: 4.7 (12 reviews)

IC EEPROM 1MBIT I2C 400KHZ 8SOIC

Производитель
Мфр. Часть #24LC1025-I/SN
Пакет SOIC-8
Лист данных 24LC1025-I/SN DataSheet
В наличии2805

+БОМ RFQ

100% оригинальный & Новые

24 часа готовы к отправке

Гарантия 365 дней

RFQ и Получить больше скидок

Спецификации

Package	Tube
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	EEPROM
Technology	EEPROM
MemorySize	1Mb (128K x 8)
MemoryInterface	I²C
ClockFrequency	400 kHz
WriteCycleTime-WordPage	5ms
AccessTime	900 ns
Voltage-Supply	2.5V ~ 5.5V
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
Package/Case	8-SOIC (0.154, 3.90mm Width)

Обзор

Description

The 24LC1025-I/SN is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip from Microchip Technology. It features a 1-Mbit (128KB) memory capacity, organized as 128 pages of 8 bytes each. This device operates on a supply voltage range of 1.8V to 5.5V, making it suitable for low-power applications.
The "I" in the part number indicates that it comes in an industrial temperature range, while "SN" refers to the specific package type and delivery format. The 24LC1025 uses a 2-wire I2C interface, allowing multiple devices to be connected on the same bus, with a maximum clock speed of 1 MHz.
Key features include self-timed write cycles, an endurance rating of over 1 million write cycles, and data retention of 100 years. This chip is commonly used in applications such as data logging, configuration storage, and any application requiring non-volatile memory.

Package

The 24LC1025-I/SN is available in an 8-lead SOIC (Small Outline Integrated Circuit) package type. This surface-mount package is designed for space-saving applications, commonly used in electronic devices for EEPROM memory.

Pinout

The 24LC1025-I/SN is a 256 Kbit I2C EEPROM (Electrically Erasable Programmable Read-Only Memory) that features a total of 8 pins. The pin configuration and their functions are as follows:
1. VCC (Pin 1): Power supply pin (typically +2.5V to +5.5V).
2. GND (Pin 2): Ground pin.
3. SDA (Pin 3): Serial Data Line for I2C communication.
4. SCL (Pin 4): Serial Clock Line for I2C communication.
5. WP (Pin 5): Write Protect pin to protect the memory from being written to when high.
6. A0 (Pin 6): Address pin for setting the least significant bit of the device address.
7. A1 (Pin 7): Address pin for setting the next bit of the device address.
8. A2 (Pin 8): Address pin for setting the most significant bit of the device address.
The device supports multiple I2C addresses, allowing for up to 8 devices to be connected on the same bus.

Manufacturer

The manufacturer of the 24LC1025-I/SN is Microchip Technology Inc. Microchip is a publicly traded company that specializes in microcontroller and analog semiconductors. Founded in 1989, it is known for its development of microcontrollers, memory products, and a wide range of integrated circuits designed for various applications, including automotive, industrial, and consumer electronics. Microchip is recognized for its innovation in embedded control solutions and provides a comprehensive ecosystem of development tools and support for engineers and designers.

Application

The 24LC1025-I/SN is a 1-Mbit EEPROM used in various applications, including industrial automation, consumer electronics, automotive systems, and medical devices. It is ideal for data storage, configuration settings, and firmware updates in systems requiring non-volatile memory. Its I²C interface facilitates easy integration into microcontroller-based designs, making it suitable for smart meters, sensors, and communication devices.

Equivalent

The 24LC1025-I/SN is an I2C EEPROM chip with 1 Mbit (128 KB) of memory. Equivalent products include:
1. 24LC1025 - Same specifications, just without the industrial temperature range.
2. AT24C1025 - Similar EEPROM from Microchip Technology.
3. M24C1025 - EEPROM from STMicroelectronics.
Ensure to check pin configurations and electrical characteristics for compatibility in specific applications.

Доставка

Методы доставки Мы

предлагать глобальные услуги доставки через DHL, FedEx, TNT, UPS или любой другой экспедитор по вашему выбору.

Ссылка на плату за доставку (DHL/FedEx):

DHL компанией: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 2-5 рабочих дней.

компании FedEx: Стоимость доставки варьируется от 25 до 40 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

УПС: Стоимость доставки варьируется от 25 до 45 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ТНТ: Стоимость доставки варьируется от 25 до 65 долларов США (0,5 кг), при этом предполагаемое время доставки составляет 3-7 рабочих дней.

ЭМС: Стоимость доставки варьируется от $30-$50 (0,5 кг), с предполагаемым сроком доставки 7-15 рабочих дней.

Зарегистрированная воздушная почта: Стоимость доставки составляет 2-4 доллара США (0,1 кг), при этом предполагаемое время доставки составляет 5-20 рабочих дней.